Tap & Toilet Repairs Sydney

That dripping tap and running toilet are wasting water and money every day. We repair, replace and install taps and toilets across Sydney - quick, tidy and done right.

A dripping tap usually means a worn washer, O-ring or cartridge. A running toilet is usually a faulty valve or worn cistern parts. A blocked toilet is often just a blockage a plumber can clear fast. Most tap and toilet repairs are quick, same-day jobs for a licensed plumber. Jetstar repairs and installs taps and toilets across Sydney, with upfront pricing and no call-out fee.

Small jobs done properly, first time

A leaking tap or a toilet that won’t stop running feels minor – until you see the water bill or the water damage. These are the everyday jobs we fix quickly and cleanly, leaving your bathroom or kitchen better than we found it.

From a worn washer to a full toilet suite swap or a new designer mixer, we carry common parts on the van so most jobs are sorted in a single visit.

Tap and toilet services for every home

Repairs, replacements and installs for kitchens, bathrooms and laundries across Sydney.

Leaking Tap Repairs

We replace worn washers, O-rings and cartridges to stop the drip and the wasted water for good.

Toilet Repairs

Running, leaking or weak-flushing toilet? We fix cisterns, valves and seals so it works like new.

Blocked Toilets

Fast, clean clearing of blocked toilets — day or night — before they overflow and cause a mess.

Tap & Mixer Installation

Supply and install of new kitchen, bathroom and laundry taps and mixers to suit your style.

Toilet Installation

We replace and install complete toilets, including wall-hung models and toilets with hidden cisterns.

Water-Saving Upgrades

Switch to water-efficient taps and dual-flush toilets and watch your water bill drop.

Signs your taps or toilet need attention

These small problems are cheap to fix early and costly to ignore:

A tap that drips or won't fully shut off
A toilet that runs long after flushing
Water pooling around the base of the toilet
A weak or incomplete flush
Squealing, knocking or hard-to-turn taps
Rust, mould or stains around fittings

The Jetstar tap & toilet process

Quick, tidy and respectful of your home – in and out with the job done.

Repair vs replace: taps and toilets

Not sure whether to fix or upgrade? Here’s a simple guide.

Situation	Usually repair	Usually replace
Dripping tap	Worn washer or cartridge	Old, corroded or mismatched tapware
Running toilet	Faulty valve or cistern part	Cracked cistern or very old suite
Weak flush	Blocked inlet or worn parts	Outdated single-flush toilet
Frequent problems	One-off fault	Repeated failures – replacing saves money

We'll always tell you honestly when a repair is the smarter choice than a replacement.

How much do tap and toilet repairs cost?

Most tap and toilet repairs are affordable, same-day jobs. A simple washer or cartridge change sits at the lower end, while installing a new mixer or toilet suite depends on the fittings you choose.

What affects the price

The type of repair - washer, cartridge, valve or seal
Whether you're repairing or installing new
The tapware or toilet suite you select
Access and condition of existing plumbing
Number of fixtures being done at once
After-hours visits if it's urgent.

Guide only - not a quote. Fixed pricing confirmed before we start, with no call-out fee.

Every job, quoted upfront

You get a clear, fixed price before we start any work – no hidden surprises and no charge just to come out and take a look.

Why choose Jetstar for taps and toilets

No job is too small. We bring the same care to a dripping tap as we do to a major plumbing project.

Fast, same-day fixes

Most tap and toilet jobs are sorted in one visit, often the same day you call.

Clean and respectful

We protect your floors, work tidily and clean up after ourselves – every time.

Guaranteed work

Licensed, insured and backed by our 100% satisfaction guarantee on every repair and install.

20 +

Years serving Sydney

24 /7

Emergency, 7 days

$ 0

Call-out fee

100 %

Satisfaction guarantee

Tap & toilet plumbers across Sydney

We repair and install taps and toilets right across the Sydney metro area, for homes, rentals and businesses.

Sydney CBD
Inner West
Eastern Suburbs
North Shore
Northern Beaches
Hills District
Sutherland Shire
Western Sydney
Parramatta
Ryde
Blacktown
Penrith

Frequently asked questions

Why is my tap still dripping after I tightened it?

A drip usually means a worn washer, O-ring or cartridge inside the tap – tightening won’t fix that and can damage the seat. A quick washer or cartridge replacement stops the drip properly.

Can you fix a running toilet the same day?

Most of the time, yes. A running toilet is generally a faulty inlet or outlet valve or a worn seal, and we carry common cistern parts on the van for same-day repairs.

My toilet is blocked - can you come out now?

Yes. Blocked toilets are handled fast, and we’re available 24/7 for urgent jobs so an overflowing toilet doesn’t turn into a bigger mess.

Should I repair or replace my old toilet?

If it’s a one-off fault, a repair is usually best. If it’s an old single-flush suite, cracks, or keeps failing, replacing it with a water-efficient dual-flush model saves water and hassle.

Can you install a tap or toilet I've already bought?

Absolutely. We’re happy to install fixtures you’ve supplied, or we can source quality tapware and toilet suites for you – your choice.

How much water does a dripping tap waste?

A steady drip can waste thousands of litres a year, which shows up on your bill. Fixing it is cheap and pays for itself – good for your wallet and for water conservation across Sydney.

Still have a question? For water-efficiency ratings on tapware and toilets, see NSW Fair Trading.